|
 Product is supplied as a mill edge coil that is
pickled, oiled, temper rolled and cropped back to gauge.
Options are available to specify product as dry or with side
trimmed edges. While this product is typically manufactured
to a specific nominal thickness, it may also be ordered to a
minimum thickness. In either case, this sheet product is sold
on an actual weight basis. This product is intended for
applications that require a clean, uniform surface and good
flatness.
USS hot rolled pickled temper rolled sheet is furnished
as a mill edge coil that is pickled, temper rolled, oiled and
cropped back to gauge. Pickling is the process of removing scale
from the hot rolled sheet surface by the action of water solutions
and inorganic acids. 
Pickling is a continuous operation that requires the ends of
successive coils to be welded together in order to form a
continuous strip and to optimize production rates. Typically,
an oil film is applied after the pickling operation to guard
against rust and wrap to wrap gouging during coil handling and /or
further processing.
Options available to our customers include the ability to
specify this product as dry and/or with side trimmed edges. This
product is intended for applications that require a clean, uniform
surface and good flatness.
Return
to top
|
